Cobra Elite Pro Kermel® and Lenzing® FR Firefighting Hood

38001-00-185084

NEW DESIGN! Hood developed to eliminate the tendency most firefighting hoods have of the bottom of the elasticized face opening pulling down off the SCBA mask gasket, creating a gap, when the head is tilted back to look overhead. Cobra Elite Pro eliminates this problem by reducing excess fabric between the base of the neck and the chin, allowing the hood to better interface with turnout coat collars by enabling the hood to slide up at the base of the neck when tilting the head back and hood is worn underneath turnout coat with collar cinched snug, rather than locking it down at the collar as current hoods do. In addition, the bib width was redesigned so that shoulder straps for SCBA frame harness systems won’t lock down the outside of the bib, which could cause the elasticized face opening to pull away from the sides of the SCBA mask, again creating a gap, when turning your head to the left or right.

Cobra Elite Pro was evaluated in multiple year-long wear trials and was the only model that didn’t pull off the bottom of the SCBA gasket when hood was worn underneath turnout coats with the collars cinched.

The Sure Difference:

Cobra Sure‑Fit hoods incorporate a 3" wide center panel rather than the traditional center seam, which allows PGI to contour the hood to the shape of the head for improved fit and comfort. Additionally, Cobra Sure‑Fit hoods have a little extra fabric (ease) built into the design which improves the hood’s thermal resistance from flame and heat due to the extra space adding a layer of air between hood and head and reduces the likelihood of the face opening pulling away from the SCBA mask when head is rotated.

Fabric Description:

Inherently flame-resistant blend of two exceptionally soft and comfortable fibers. Fabric blend offers excellent thermal insulation, providing efficient protection from heat, even in lighter weights. Interlock knit gives the fabric the finest hand and smoothest surfaces of all knits. Due to its low modulus, Kermel® fiber is silk-soft to the touch, making hoods or base layers made from it extremely comfortable. Both the Kermel® and Lenzing FR® fibers are solution-dyed navy blue during the manufacturing process, making the color an inherent part of the yarn itself, eliminating fading due to UV exposure or through repeated washing and drying. Additionally, the fabric has excellent pill and abrasion resistance, keeping the hoods or base layers looking new, even after prolonged use and repeated launderings.

Sizing:

One size fits most

Options:

Thread
Cobra hoods are available sewn with either color-coordinated (matching) or color-contrasting 100% Nomex® thread.
Direct Embroidery
100% Nomex® thread embroidered on bib. Minimum order 25 each.
Ink Heat Transfers
High resolution multi-color transfers. Minimum order 100 each.

38001-00-185084 Declaration of Conformity - 2022
38001-00-185084 EU Certificate - 2022
38001-00-185084 UKCA Certificate - 2022

Features

Test Results

Fabric Performance ValuesRequirements NFPA 1971
2018 Edition
PGI Test Results
Thermal Protective Performance (TPP)
  • As Received
20.0 (min)22.8
  • After 5 Washings
20.0 (min)30.0
Hood Material Burst Strength 225 N462 N
Flame Resistance Test

After Flame (Wales x Courses)

  • As Received
2.0 sec0.4 sec x 0.4 sec
  • After 5 Washings
2.0 sec0.5 sec x 0.5 sec

Char Length (Wales x Courses)

  • As Received
100 mm44 mm x 41 mm
  • After 5 Washings
100 mm36 mm x 30 mm
Cleaning Shrinkage Resistance Test

Hood Measurement

  • After 5 Washings
-5%0.0%

Face Opening Measurement

  • After 5 Washings
Meets RequirementYES
Heat & Thermal Shrinkage Resistance Test

Hood Measurement

  • As Received
-10%-0.3% to 0.0%
  • After 5 Washings
-10%-0.3% to 0.0%

Face Opening Measurement

  • As Received
Meets RequirementYES
  • After 5 Washings
Meets RequirementYES
Seam Breaking Strength Test 181 N742 N
Melt or Drip When Exposed to FlameNo Melting or DrippingNONE

Product Line

Cobra<sup>™</sup> Elite Pro Comfort Plus<sup>™</sup> Nomex<sup>®</sup> (Meta‑Aramid) and Lenzing FR<sup>®</sup>

Cobra Elite Pro Comfort Plus Nomex® (Meta‑Aramid) and Lenzing FR®

Cobra<sup>™</sup> Elite Pro Para‑Tek FR<sup>™</sup> Tri‑Blend

Cobra Elite Pro Para‑Tek FR Tri‑Blend

Cobra<sup>™</sup> Elite Pro Carbon Shield<sup>™</sup>

Cobra Elite Pro Carbon Shield

Cobra<sup>™</sup> Elite Pro Para‑Tek FR<sup>™</sup> Tri‑Blend

Cobra Elite Pro Para‑Tek FR Tri‑Blend

Cobra<sup>™</sup> Elite Pro 100% Nomex<sup>®</sup> Meta‑Aramid

Cobra Elite Pro 100% Nomex® Meta‑Aramid

Cobra<sup>™</sup> Elite Pro Para‑Tek FR<sup>™</sup> Tri‑Blend

Cobra Elite Pro Para‑Tek FR Tri‑Blend