Cobra Classic PBI/Lenzing FR® with Comfort Plus Liner Firefighting Hood

30100-00-182085

Cobra Classic hoods provide double layer coverage of neck, upper chest and top of the shoulder blades. The notched side helps bib lie flat for improved interface with bunker coat. Flat-stitched seams eliminate bunching and won’t dig into skin. A half inch wide elastic face opening stretches to full 17" to ensure a snug fit around most SCBA masks. UL Classified to NFPA 1971 Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting – Current Edition.

The Comfort Plus Advantage:

A lightweight, high performance lining made from flame resistant Nomex® and Lenzing FR® fibers that deliver an exceptionally high TPP rating. Softer and more breathable, this liner is designed to keep the wearer cooler, drier and more comfortable.

Fabric Description:

PBI is an extraordinary fiber that doesn’t burn in air. Blended with Lenzing FR®, this fabric is the most comfortable flame resistant hood fabric on the market. Even though fabric is incredibly lightweight, the proprietary Comfort Plus Liner offers an exceptionally high TPP rating.

Sizing:

One size fits most

Options:

Thread
Cobra hoods are available sewn with either color-coordinated (matching) or color-contrasting 100% Nomex® thread.
Direct Embroidery
100% Nomex® thread embroidered on bib. Minimum order 25 each.
Ink Heat Transfers
High resolution multi-color transfers. Minimum order 100 each.

Features

Test Results

Fabric Performance ValuesRequirements NFPA 1971
2018 Edition
PGI Test Results
Thermal Protective Performance (TPP)
  • As Received
20.0 (min)40.7
  • After 5 Washings
20.0 (min)39.0
Hood Material Burst Strength
  • PBI/Lenzing FR®
225 N408 N
  • Comfort Plus
225 N374 N
Flame Resistance Test

After Flame (Wales x Courses) – PBI/Lenzing FR®

  • As Received
2.0 sec0.0 sec x 0.0 sec
  • After 5 Washings
2.0 sec0.0 sec x 0.0 sec

Char Length (Wales x Courses) – PBI/Lenzing FR®

  • As Received
100 mm30 mm x 20 mm
  • After 5 Washings
100 mm18 mm x 19 mm

Char Length (Wales x Courses) – Comfort Plus

  • As Received
100 mm39 mm x 38 mm
  • After 5 Washings
100 mm33 mm x 38 mm
Cleaning Shrinkage Resistance Test

Hood Measurement

  • After 5 Washings
-5%-0.7% to 0.0%
Heat & Thermal Shrinkage Resistance Test

Hood Measurement

  • As Received
-10%-1.5% to 0.0%
  • After 5 Washings
-10%0.0% to 0.4%
Limited Oxygen Index (LOI)
  • PBI/Lenzing FR®
Not Required33
  • Comfort Plus
Not Required29
Seam Breaking Strength Test 181 N806 N
Melt or Drip When Exposed to FlameNo Melting or DrippingNONE
Arc Thermal Performance Value (ATPV)9.4 cal/cm2
NFPA 70E Hazard Risk Category (HRC)HRC 2

Product Line

Cobra<sup>™</sup> Classic<sup>™</sup> Kermel<sup>®</sup> and Lenzing<sup>®</sup> FR

Cobra Classic Kermel® and Lenzing® FR

Cobra<sup>™</sup> Classic<sup>™</sup> Ara‑Tek FR<sup>™</sup> Tri‑Blend

Cobra Classic Ara‑Tek FR Tri‑Blend

Cobra<sup>™</sup> Classic<sup>™</sup> Comfort Plus<sup>™</sup> Nomex<sup>®</sup> (Meta‑Aramid) and Lenzing FR<sup>®</sup>

Cobra Classic Comfort Plus Nomex® (Meta‑Aramid) and Lenzing FR®

Cobra<sup>™</sup> Classic<sup>™</sup> Para‑Tek FR<sup>™</sup> Tri‑Blend

Cobra Classic Para‑Tek FR Tri‑Blend

Cobra<sup>™</sup> Classic<sup>™</sup> 100% Nomex<sup>®</sup> Meta‑Aramid

Cobra Classic 100% Nomex® Meta‑Aramid

Cobra<sup>™</sup> Classic<sup>™</sup> PBI/Lenzing FR<sup>®</sup> with Comfort Plus<sup>™</sup> Liner

Cobra Classic PBI/Lenzing FR® with Comfort Plus Liner