Cobra Classic Para‑Tek FR Tri‑Blend Firefighting Hood

30200-00-120098

Cobra Classic hoods provide double layer coverage of neck, upper chest and top of the shoulder blades. The notched side helps bib lie flat for improved interface with bunker coat. Flat-stitched seams eliminate bunching and won’t dig into skin. A half inch wide elastic face opening stretches to full 17" to ensure a snug fit around most SCBA masks. UL Classified to NFPA 1971 Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting – Current Edition.

Fabric Description:

PGI's proprietary tri-blend of Lenzing FR®, high strength para-aramid and high tenacity nylon. This superb flame resistant fiber combination offers an outstanding TPP rating, arc flash protection and excellent moisture absorbency.

Sizing:

One size fits most

Options:

Thread
Cobra hoods are available sewn with either color-coordinated (matching) or color-contrasting 100% Nomex® thread.
Direct Embroidery
100% Nomex® thread embroidered on bib. Minimum order 25 each.
Ink Heat Transfers
High resolution multi-color transfers. Minimum order 100 each.

Features

Test Results

Fabric Performance ValuesRequirements NFPA 1971
2018 Edition
PGI Test Results
Thermal Protective Performance (TPP)
  • As Received
20.0 (min)32.7
  • After 5 Washings
20.0 (min)31.5
Hood Material Burst Strength 225 N476 N
Flame Resistance Test

After Flame (Wales x Courses)

  • As Received
2.0 sec0.0 sec x 0.0 sec
  • After 5 Washings
2.0 sec0.0 sec x 0.0 sec

Char Length (Wales x Courses)

  • As Received
100 mm42 mm x 44 mm
  • After 5 Washings
100 mm28 mm x 41 mm
Cleaning Shrinkage Resistance Test

Hood Measurement

  • After 5 Washings
-5%-0.7% to 0.0%
Heat & Thermal Shrinkage Resistance Test

Hood Measurement

  • As Received
-10%-1.4% to 0.0%
  • After 5 Washings
-10%-0.4% to 0.9%
Limited Oxygen Index (LOI)Not Required31
Seam Breaking Strength Test 181 N789 N
Melt or Drip When Exposed to FlameNo Melting or DrippingNONE
Arc Thermal Performance Value (ATPV)33 cal/cm2
NFPA 70E Hazard Risk Category (HRC)HRC 3

Product Line

Cobra<sup>™</sup> Classic<sup>™</sup> Ara‑Tek FR<sup>™</sup> Tri‑Blend

Cobra Classic Ara‑Tek FR Tri‑Blend

Cobra<sup>™</sup> Classic<sup>™</sup> 100% Nomex<sup>®</sup> Meta‑Aramid

Cobra Classic 100% Nomex® Meta‑Aramid

Cobra<sup>™</sup> Classic<sup>™</sup> Kermel<sup>®</sup> and Lenzing<sup>®</sup> FR

Cobra Classic Kermel® and Lenzing® FR

Cobra<sup>™</sup> Classic<sup>™</sup> PBI/Lenzing FR<sup>®</sup> with Comfort Plus<sup>™</sup> Liner

Cobra Classic PBI/Lenzing FR® with Comfort Plus Liner

Cobra<sup>™</sup> Classic<sup>™</sup> Comfort Plus<sup>™</sup> Nomex<sup>®</sup> (Meta‑Aramid) and Lenzing FR<sup>®</sup>

Cobra Classic Comfort Plus Nomex® (Meta‑Aramid) and Lenzing FR®

Cobra<sup>™</sup> Classic<sup>™</sup> Carbon Shield<sup>™</sup>

Cobra Classic Carbon Shield